Firing Services for Non-Members

Come to Amphora during open studio hours to drop off your work to be fired. We will fire greenware and glazeware. Firing fees will depend on the volume of work. Minimum fee is $35 for work that fits on a single shelf in the KM 1027 with kiln posts. In order to fire your work in our kilns please fill out the form on the right providing us with as much detail as possible about your work when you drop it off with a staff member. You will need to unpack your own work onto our firing racks.

Requirements

  • Each piece must be clearly labeled with your name or makers mark.

  • Please list all clay bodies and glazes by brand name.

  • No home made glazes or wild clays can be fired.

  • Work with materials other than clay or glaze will also not be fired.

  • Please allow 2-3 weeks for your work to be fired.

  • We will contact you through email when your work is ready to pick up.

  • Payment will be collected when you drop off your items.

  • Please unpack your work onto a shelf as directed by a staff member.

  • Stilting is an additional fee of $1 per stilt. Stilts not provided.

  • Amphora is not responsible for fired results or damages of any kind.

  • We reserve the right to refuse firing services for any reason.

  • Makers assume full responsability for the replacement and repair for any equipment damaged during the firings.

  • Turn around time is approximate and we can not be held to deadlines.

  • Finished work left longer than 30 days will be discarded.

  • Any work that does not meet our firing guidelines will not be fired. See details below:

Firing Guidelines for Non-Members

Firing Guidelines: In order for us to safely fire your work in our kilns it must meet the following guidelines:

Greenware work for the bisque firing:

  • You must know what clay body and other materials used what temperature everything matures at.

  • Must be bone dry

  • Must not be thicker than 1/2 inch anywhere

  • Must not contain anything other than cone 5 clay

  • Must not contain armatures, paper or other sculpture tools

  • Must not be painted with underglaze that melts at cone 05

  • All hollow work must have holes for air to escape

  • Must have your name clearly written on the bottom

  • Must fit on a half shelf with kiln posts. The base of the piece can not be larger than 11 X 21in

  • Must be no taller than 25 inches


Glazeware for the glaze firing:

  • Must be 100% clean of glaze on the bottom and a minimum of 1/4 in on the sides of the foot.

  • Must not be greenware. All glazed work must already be bisquefired.

  • You must know the clay and glaze materials used on the work and what temperature they both mature at.

  • Must have your name clearly visible on the bottom.

  • Must fit on a half shelf with kiln posts. The base of the piece can not be larger than 11 X 21in

  • Must not be glazed with any unapproved glazes.

  • Must be placed on a cookie if it has a hole in the bottom. Cookies not provided.

  • Any stilts, bead racks, or kiln furniture used must be approved by a staff member. Stilts and bead racks are not provided.

Amphora will not fire work that has the following glazes or underglazes:

  • Any underglaze that fluxes at 05/06 applied to greenware

  • Amaco LG Series

  • Amaco Opalescent

  • Mayco Stroke & Coat or Speckled Stroke & Coat on greenware. Must be on bisque

  • Mayco Foundations

  • Astro Gem

  • Classic Crackles

  • Cobblestone by Mayco

  • Elements or Elements and Chunkies by Mayco

  • Duncan E-Z Stroke on greenware. Must be on bisque

  • Jungle Gems Crystal Glazes

  • Snowfall Glazes

  • Mayco Flux

  • Spektra Clear Glazes

  • Low Fire Glazes

  • Pottery Cascade

  • French Dimensions

  • Overglazes

  • Raku Glazes

  • Crawl glazes

  • Lava glazes

  • Anything that is very runny and will stick pots to the kiln shelf